It is not possible profet, you will need a passthru and an on line sub with ford and the
fmp j2534 software to do it, also data as built is needed since your original abs module
is unreadable. Good luck.

 yes if you are only interested in flashing ford you can get the ford mongoose pro from drewtech, now this one cost about 500 dollars and you can only do ford,lincoln,mercury and probably mazda. I recommend  cardaq or cardaq m from drew-tech if you live in usa or actia xs if you live out side of usa, they both come with a great tool box utility. the cost is about 1800 dollars. now being that this is an autel site of -course I will recommend the autel maxi-flash pro  the price varies from 700 to 1000, and you can use it with the 908 maxisys on autel server which is providing benz and bmw flashing at the moment, a great deal all around. the autel maxiflash pro has not been validated by any manufacturer as of yet but it is known to work  on many vehicles flawlessly i have tested it my self and it is a great j2534 and affordable Honestly it is great.

    ok profe, good luck with your investigation.